A 3-driver, 2-way surround speaker featuring dual 1-inch C-CAM® tweeters, and a 8 inch C-CAM® bass driver featuring RST®. The C380-FX can be configured to deliver direct or diffuse surround-sound effects via front-mounted switch or alternatively using the 12 volt trigger found on high-end AV amplifiers.

Dual tweeter configuration for use in di-pole or bi-pole mode.
RST® bass driver and C-CAM® tweeters, providing coherent tonal balance and sonic signature across the entire audio frequency spectrum.
High overall efficiency.
High frequency level adjustment (+/- 3dB).
Timbre-match with GS, RS-CP, in-ceiling/wall and Gold Signature, Silver RS hi-fi speakers.
Our innovative Tri-Grip fixing system is easier to install than conventional clamping schemes but provides three times the surface area and a better surface seal, maximising bass response and mid-range clarity.
Aluminium alloy grilles offer rust-free performance and longevity. They are non magnetic and lighter in weight.
All models are paint-able to blend with the living environment. A paint mask and additional scrim material are provided for trouble free painting.
All models use fire retardant materials specified to UL-94 VO rating.
All models are splash and humidity proof for installation in shower rooms or pool areas.
All models feature dust protection covers that are designed to prevent the ingress of dirt or dust into the driver and crossover.

Frequency Response: 45 Hz - 30 KHz
Sensitivity (1W@1M): 90 dB
Impedance (Nominal): 6 ohms
Maximum SPL
(Single unit in free space): 111.6 dBA
Power Handling (RMS): 150 W
Recommended Amp Requirements: 20 - 150 W
Drivers: 1x 8” C-CAM® cone base driver RST®
2 x 1” C-CAM® gold dome tweeter
Overall Diameter: 286 mm
(11 1/4 inch)
Overall Depth: 161 mm
(6 5/16 inch)
Cut-Out Diameter: 247 mm
(9 3/4 inch)
Mounting Depth: 157 mm
(6 3/16 inch)
Controls: +3db / 0dB / -3dB High frequency level switch.
Di-pole/Bi-pole switch with additional 12 volt trigger switch
Fixing Type: 3 position Tri-Grip dog fixings
Cable Connection: Gold plated ‘push’ type terminals
Construction Material: Frame: Mineral filled ABS plastic
(UL94-V0 rated, RoHS compliant)
Baffle: Die-cast Aluminium
Weight: 3.2 Kg (7 lb)